Home > Voice over IP > Configuring Elastix SIP Trunk to Sipgate

Configuring Elastix SIP Trunk to Sipgate

January 16th, 2012

Another aide-memoir, these are the setting required to enable a sipgate account (and PSTN number) to connect to a phone registered to your Elastix / Asterisk PBX:

Outbound Caller ID: [your sipgate userid]

PEER Details:
————
type=friend
insecure=invite
nat=yes
username=[your sipgate userid]
fromuser=[your sipgate userid]
fromdomain=sipgate.co.uk
secret=[your sipgate password]
host=sipgate.co.uk
qualify=yes
canreinvite=no
dtmfmode=rfc2833
context=from-sipgate
disallow=all
allow=ulaw&alaw

USER Context: [your sipgate userid]

USER Details:
————-
authuser=[your sipgate userid]
context=from-trunk
nat=yes
dtmfmode=info
fromdomain=sipgate.co.uk
fromuser=[your sipgate userid]
host=sipgate.co.uk
insecure=very
secret=[your sipgate password]
type=peer
username=[your sipgate userid]
disallow=all
allow=ulaw&alaw

Register String: [your sipgate userid]:[your sipgate userid]@sipgate.co.uk/[your sipgate userid]

NOW CONFIGURE INBOUND ROUTE:
—————————-

DID Number: [your sipgate userid]
Then route to target (e.g. an extension) of your choice.

Categories: Voice over IP Tags: ,
Comments are closed.