Cisco ASA – Initial Configuration
March 9th, 2013
No comments
This post describes the tasks required for a basic configuration of the Cisco ASA. Please note that he smaller Cisco ASA 5505 has an 8-port 10/100 switch which operates at Layer 2 only. So you can not configure the physical ports as Layer 3 routed ports, you need to create VLAN interfaces. By default, interface Ethernet0/0 is assigned to VLAN 2 and it’s the outside (internet-facing or untrusted)interface. The remaining seven interfaces (Ethernet0/1 to 0/7) are assigned to VLAN 1 Read more…